january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011


Key features of brass threaded fittings
A wide range of brass threaded fittings is available in the GNALI BOCIA catalogue, articles made from raw material certified by suppliers. The careful choice of the latter ensures compliance of the alloys both with technical demands and with international certification.
Both CW614N bars, from [...]

Which are the standards for meter valves?
For connections to the distribution network and to the meter it is necessary to use meter valves which guarantee the interception of the fuel fluid and the isolation of the system from the network.
Made with a closing ball, these meter valves conform to EN331 which defines all criteria for [...]

Some virtues of brass manifolds

A fitter certainly has many advantages when choosing brass manifolds for implementing systems, whether they are sanitary or heating. The use of these items ensures assembly is more economical as the use of less rigid pipes speeds up the installation phase. The reliability of the system is [...]

Choose gas taps from our catalogue
The more the user requirements, the broader the proposals by the GNALI BOCIA company in the field of gas taps, which you can find installed on stoves and burners, whether civil, industrial or camping and outdoor applications.
Starting from the needle version, passing through the cone ones to [...]

What we need to know about mini control units
When you need compact solutions for connecting multiple users to a single tank in gas fired plants, the best solution is to use mini control units; we can find them in various models in the special catalogue.
GNALI BOCIA has always tried to meet the needs of the end customer in terms of ease [...]

Automatic air relief valves also for radiators
Impurities present in heating installation fluids, generally water, can lead to generating dissolved gases which tend to accumulate in the highest points of the circuit, including radiators. Air relief valves placed on radiators allow discharging air accumulation outside the system as this can [...]

Fail-safe aspects of the fuel shut-off valve
When we talk of system safety, we immediately think of a fail-safe device such as the fuel shut-off valve which interrupts the fuel flow to the boiler when a higher temperature than the pre-set safety one is registered on exit. Calibration of a complex mechanism such as the fuel shut-off valve [...]

Stainless steel flexible tubes model FL286
The GNALI BOCIA catalogue offers non-extensible model FL286 stainless steel flexible tubes whose length of two metres maximum corresponds perfectly to the new EN14800 regulation. They are made from a corrugated pipe of austenitic stainless material which ensures the stainless steel flexible [...]

Balanced pressure regulators for civil and industrial applications
Regulating gas distribution pressure may be done through locally installed pressure regulators, particularly for low and small flow values. However, when the pressure and flow values are much higher we can use balanced pressure regulators. The models produced by GNALI BOCIA are spring loaded [...]

Key-locked meter valves
System parts adjacent to the meter, both upstream and downstream, are extremely important in the field of Natural Gas distribution. Meter valves enable intercepting gaseous fluids both upstream and downstream of the metering device and must ensure perfect sealing. Produced in chrome-plated [...]

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.