ARCHIVE
january 2023
december 2022
november 2022
october 2022
september 2022
august 2022
july 2022
june 2022
may 2022
april 2022
march 2022
february 2022
december 2021
november 2021
october 2021
september 2021
august 2021
july 2021
april 2021
march 2021
february 2021
january 2021
december 2020
november 2020
october 2020
september 2020
august 2020
july 2020
june 2020
may 2020
april 2020
march 2020
february 2020
january 2020
december 2019
october 2019
august 2019
may 2019
march 2019
february 2019
january 2019
december 2018
november 2018
october 2018
september 2018
august 2018
july 2018
april 2018
march 2018
february 2018
january 2018
december 2017
november 2017
october 2017
september 2017
august 2017
july 2017
june 2017
may 2017
april 2017
march 2017
february 2017
january 2017
december 2016
november 2016
october 2016
september 2016
august 2016
july 2016
june 2016
may 2016
april 2016
march 2016
february 2016
january 2016
december 2015
november 2015
october 2015
september 2015
august 2015
july 2015
june 2015
may 2015
april 2015
march 2015
february 2015
january 2015
december 2014
november 2014
october 2014
september 2014
august 2014
july 2014
june 2014
may 2014
april 2014
march 2014
february 2014
january 2014
december 2013
november 2013
october 2013
september 2013
august 2013
july 2013
june 2013
may 2013
april 2013
march 2013
february 2013
january 2013
april 2011

Blog


The resistances for water heaters: theoretical and practical operation
The resistances are fundamental components for the construction of electrical systems. In fact, resistors (also called resistances) are components placed in the circuits to oppose a specific electrical resistance to the passage of electric current. Although these components represent any users [...]
13/07/2022

Hydraulic ball valves: characteristics, materials and production
Hydraulic ball valves represent the most common alternative that can be found within a plumbing system. The main element is constituted by the shutter which has a cylindrical hole: when the valve is open, the cylindrical section is arranged coaxially to the tube allowing the passage of the fluid [...]
21/06/2022

Boiler safety valves do not always leak because they are faulty
The safety valve for the boiler is an essential automatic component for the system. Its main role is to prevent the pressure from rising above an excessively dangerous value, which is about 3 bar for normal wall-mounted boilers: if this value is exceeded, the valve acts automatically going to [...]
06/06/2022

Stainless steel flexible hoses for water and gas
We have two types of stainless steel flexible hoses in the section dedicated on the company catalog of our products, and both are made of corrugated stainless steel and can be extended up to twice their original length. For the construction of these stainless steel flexible hoses there is used a [...]
25/05/2022

Pressure preducers in hydraulic systems
The choice and installation of pressure regulators (or pressure reducers) for a hydraulic system is essential. In fact, the water supplied by the public distribution network is often at higher pressure values than what a domestic user actually needs. The reason for this surplus of pressure is [...]
04/05/2022

Safety valves and block valves
The systems that carry combustible gases require precise and reliable control systems that can intervene in the event of an anomaly of any kind, avoiding accidents and even serious malfunctions that can compromise the operation of the systems themselves and endanger the people who are found in the [...]
20/04/2022

Electrical resistances for heating water
In plumbing systems, many times, it is not possible to use burners or flames to allow the conveyed water to be heated. This prohibition derives from legislative reasons but, above all, from regulations that aim to regulate the health and safety of all the people who live or may be in the [...]
08/04/2022

Air vent valves even for boilers
The boilers require the assembly of air vent valves in order to achieve maximum efficiency during their operation, since an abnormal accumulation of gas (released in the system and due to the heating of the fluid) could block the whole system. In fact, air is mainly a double problem: on the one [...]
28/03/2022

Types, characteristics and production of PVC LPG pipes
What is LPG? LPG, an acronym for liquefied petroleum gas, indicates a mixture of low molecular weight hydrocarbons that are in the liquid state thanks to the modest compression required for the change of state which facilitates its transport and storage. It is an odorless gas that is odorized [...]
15/03/2022

Water pressure reducers: types and installation
Water pressure reducers are fundamental components for the construction of systems and for the management of aqueous fluids. In fact, they allow the pressure of the fluid to be reduced, making it suitable for some applications in which it must be used. The experience and precision of Gnali Bocia [...]
21/02/2022

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.