Utilization of the nickel-plated brass manifolds with stopcock
Nickel-plated brass manifolds, characterized by low footprint, which might be installed onto the wall.
In the GNALI BOCIA catalogue we find a full assortment of brass manifolds in the versions with two to four derivations, which allow infinite combinations so as to connect the desired number of users. Linked to the supply column, they grant the comfort of intercepting every single joint and facilitate maintenance in the event of a fault.
The 35 mm wheelbase is utilized in the brass manifolds where space is precious, whereas the 40 mm grants greater installation ease to the detriment of footprints. In both instances, the manifolds might be placed in boxes to be walled, which enable an elegant occultation, due also to the limited footprints.
The construction occurs by starting from a forged CW617N brass monoblock so as to achieve uniformity of material, which is useful for ensuring the performances of the article; every piece is then plated with nickel in such a manner that the surface might resist the action of building materials while also retaining an excellent aesthetics.
The brass manifolds are then wrought on last generation transfer machines so as to create the threaded joints and the seats for the shut-off screws. The manufacturing is carried out after the superficial treatment, so that it is removed from the internal surfaces; due to legislative requirements it must not come into contact with water.
As accessories for the brass manifolds, handles of different colours are available in the catalogue, as well as kits for linking flexible tubes in Pex or Multilayered.
The 35 mm wheelbase is utilized in the brass manifolds where space is precious, whereas the 40 mm grants greater installation ease to the detriment of footprints. In both instances, the manifolds might be placed in boxes to be walled, which enable an elegant occultation, due also to the limited footprints.
The construction occurs by starting from a forged CW617N brass monoblock so as to achieve uniformity of material, which is useful for ensuring the performances of the article; every piece is then plated with nickel in such a manner that the surface might resist the action of building materials while also retaining an excellent aesthetics.
The brass manifolds are then wrought on last generation transfer machines so as to create the threaded joints and the seats for the shut-off screws. The manufacturing is carried out after the superficial treatment, so that it is removed from the internal surfaces; due to legislative requirements it must not come into contact with water.
As accessories for the brass manifolds, handles of different colours are available in the catalogue, as well as kits for linking flexible tubes in Pex or Multilayered.
09/04/2015
I contenuti di questo sito non hanno carattere di periodicità e non rappresentano 'prodotto editoriale'.